Update: budget(200-600), the reason for the build is I found cheap 4tb drives for almost $10/Terabyte. So I want to use as much of them as I can

I am trying to build my final NAS build as a beginner.

I have a 6x4tb dell server, but it’s not enough.

I am currently trying to build the final boss of my nasses. 4x16tb with truenas with raid

I am unsure of what parts to buy as I am a complete beginner.

I found a case that can hold all 14 drives.

I need a motherboard, CPU, ram, PSU

I am on a budget, kind of.

What motherboard do you recommend? Pulled from a workstations with CPU and ram? A server board? Normal consumer with normal consumer CPU? Motherboard should have some pcie slots for 2 sata cards and one 2.5 GB card.

What CPU to run all these drives?

What ram and how much? 16? 32? Ecc, non ecc? Ddr4? Ddr3?

Power supply: 850w or more?

All parts should be able to support the 16 drives with headroom…

I would appreciate any help on this build, I want to build this as soon as possible.

Thanks

  • Ferrous@lemmy.mlEnglish
    31·
    5 hours ago

    Hey, you basically defined my system.

    Truenas scale machine running 4x 16TB drives. I use a cheap rosewill 4u server rack case. It has hot swap drive bays in front. Big plus.

    The brain is an amd 5950x running on an asrock x570 steel legend w/ 128GB of the cheapest crucial DDR4 ECC I could find. Also running an rtx 2080 for jellyfin transcoding.

    My consumer mobo is the bottleneck. Given how my end goal is to have a 10gb nic and an LSI card for more sata ports, I’m going to have to get creative with m.2 ports. I might plug a 10gb nic into an m.2 port.

    PSU was a 1kW fractal platinum rated. Way overkill, but the high efficiency is key.

    You’ll notice my build uses a lot of gaming parts - i simply harvested my old parts when I upgraded my gaming PC. Despite this, it still idles under 200 watts. My point is not that you should seek out gaming parts, but if you happen to have any on hand, they could be effectively leveraged given price increases on new parts.

    The biggest thing is: Use ECC. This is non negotiable for your setup. ECC saved me a couple weeks ago when my 5950x shot craps, randomly. So far no issues after increasing to a set voltage. ZFS and ECC go together like peas in a pod.