Update: budget(200-600), the reason for the build is I found cheap 4tb drives for almost $10/Terabyte. So I want to use as much of them as I can

I am trying to build my final NAS build as a beginner.

I have a 6x4tb dell server, but it’s not enough.

I am currently trying to build the final boss of my nasses. 4x16tb with truenas with raid

I am unsure of what parts to buy as I am a complete beginner.

I found a case that can hold all 14 drives.

I need a motherboard, CPU, ram, PSU

I am on a budget, kind of.

What motherboard do you recommend? Pulled from a workstations with CPU and ram? A server board? Normal consumer with normal consumer CPU? Motherboard should have some pcie slots for 2 sata cards and one 2.5 GB card.

What CPU to run all these drives?

What ram and how much? 16? 32? Ecc, non ecc? Ddr4? Ddr3?

Power supply: 850w or more?

All parts should be able to support the 16 drives with headroom…

I would appreciate any help on this build, I want to build this as soon as possible.

Thanks

  • Onomatopoeia@lemmy.cafeEnglish
    2·
    4 hours ago

    Others have mentioned power - you may want to do some math on drive cost vs power consumption. There’ll be a drive size point that is worth the cost because you’ll use fewer drives which consume less power than more drives.

    Having built a number of systems, I’m a LOT more conscious of power draw today for things that will run 24/7. Like my ancient NAS draws about 15 watts at idle with 5 drives (It will spin down drives).

    More drives will always mean more power, so maybe fewer but larger drives makes sense. You may pay more up front, but monthly power costs never go away.

    Also, I’ve built a 10 drive n NAS like this (because I had the drives and the case, mono and ram). It can produce a lot if heat while doing anything, and it was a significant power hog - like 200w when running. And it really didn’t idle very well (I’ve run it with UnRaid, TruNAS and Proxmox).