I’ve done all my work in Freecad for years. Its really good at converting a stl back in to a solid. Some think its hard to do but its really easy and consistent. Some take more steps than others but its a solid tool for doing a rework on a 3d printable object. I can usually in a matter of minutes split a stl into separate models for multi color printing.
This is going to be a upside down work flow since it varies depending on what you are trying to achieve. If you want to split an object up in order to make it a multi part/color print then start with 1a otherwise start with 1
Start with a new document
import stl file
Under the part menu convert to ‘shape from mesh’
Under the part menu in the copy menu click ‘refine shape’ not required but I find it sometimes makes the resulting solid a little
smoother.
Under the part menu click ‘Convert to solid’
If all steps are successful you are done. If not then delete everything and start back with the mesh. The most common error for me is ‘Cannot convert because Shape is not a shell’
1a. Under the mesh menu click ‘Split by components’ There are also some repairs you can make on a mesh under analyze. I rarely use these but have had some success with them from time to time.
This will create at least two component meshes. I’ve had many more than that and at some point it isn’t worth it at least for me.
2a .Perform steps 1 through 5 on all components.
Under the part menu select all the converted solid components and use the union tool to create a fusion of them.
I’ve done all my work in Freecad for years. Its really good at converting a stl back in to a solid. Some think its hard to do but its really easy and consistent. Some take more steps than others but its a solid tool for doing a rework on a 3d printable object. I can usually in a matter of minutes split a stl into separate models for multi color printing.
What’s your workflow for this? I have a handful of stls I would love to tweak.
This is going to be a upside down work flow since it varies depending on what you are trying to achieve. If you want to split an object up in order to make it a multi part/color print then start with 1a otherwise start with 1
Start with a new document
import stl file
Under the part menu convert to ‘shape from mesh’
Under the part menu in the copy menu click ‘refine shape’ not required but I find it sometimes makes the resulting solid a little smoother.
Under the part menu click ‘Convert to solid’
If all steps are successful you are done. If not then delete everything and start back with the mesh. The most common error for me is ‘Cannot convert because Shape is not a shell’
1a. Under the mesh menu click ‘Split by components’ There are also some repairs you can make on a mesh under analyze. I rarely use these but have had some success with them from time to time. This will create at least two component meshes. I’ve had many more than that and at some point it isn’t worth it at least for me.
2a .Perform steps 1 through 5 on all components. Under the part menu select all the converted solid components and use the union tool to create a fusion of them.