I’m blind (the device in back with the Freedom Scientific logo is an assistive magnifier). Both cooking and sewing are common skills taught in rehab centers for the newly blind, and soldering has aspects of both, being mindful of something very very hot near your hands, and having a certain amount of dexterity.
Here’s what I did to build up confidence. I bought a bunch of perf board and resistors and I just started soldering the resistors to the perf board, that’s it. No goal other than to practice soldering. I had tried one of those beginner’s first electronics kits off Amazon, the ones with just an LED and a switch or whatever. I got discouraged because I messed up. So I figured if I didn’t actually try to make something, I could relax and focus on soldering technique. I was eventually able to solder header pins onto a Raspberry pi zero and even terminate a coax cable, and now I can say I replaced a GB cart battery.
Fire isn’t a concern, really, the temperatures are low enough that it starts slow. Rest it on wood and you’ll have time to wonder why you smell wood smoke, then wonder why it’s inside, etc. before it burns down.
The real hazard is inhaling rosin fumes (says the guy who doesn’t properly ventilate his workstation). If you’re anxious about lead (I was) there is lead-free solder, though it requires higher temperatures to work with. As far as lead goes, the risk is from getting flecks of it on your fingertips and then touching your eyes or mouth. I imagine it’s less of a problem than it feels like in my head, but something something environmentally friendly.
I’ve been so on the fence about attempting to solder, but it frightens me the idea of causing a little sparky fire.
So, good on you!
I’m blind (the device in back with the Freedom Scientific logo is an assistive magnifier). Both cooking and sewing are common skills taught in rehab centers for the newly blind, and soldering has aspects of both, being mindful of something very very hot near your hands, and having a certain amount of dexterity.
Here’s what I did to build up confidence. I bought a bunch of perf board and resistors and I just started soldering the resistors to the perf board, that’s it. No goal other than to practice soldering. I had tried one of those beginner’s first electronics kits off Amazon, the ones with just an LED and a switch or whatever. I got discouraged because I messed up. So I figured if I didn’t actually try to make something, I could relax and focus on soldering technique. I was eventually able to solder header pins onto a Raspberry pi zero and even terminate a coax cable, and now I can say I replaced a GB cart battery.
That’s impressive as hell, tbh. I’m glad rehab centers focus on such useful, otherwise seemingly inaccessible skills
It’s a useful skill to know, and it’s not super hard to learn. It just takes some practice.
As long as you have some common sense(eg: dont set the iron down on something flammable) you shouldn’t need to worry about fires.
Fire isn’t a concern, really, the temperatures are low enough that it starts slow. Rest it on wood and you’ll have time to wonder why you smell wood smoke, then wonder why it’s inside, etc. before it burns down.
The real hazard is inhaling rosin fumes (says the guy who doesn’t properly ventilate his workstation). If you’re anxious about lead (I was) there is lead-free solder, though it requires higher temperatures to work with. As far as lead goes, the risk is from getting flecks of it on your fingertips and then touching your eyes or mouth. I imagine it’s less of a problem than it feels like in my head, but something something environmentally friendly.
It’s a fruity note… inhales deeply … reminiscent of… fir with notes of cinnamon.