I’m following the settings on WLED’s wiki for the WS2814 strip:

6-LED groups (24V) as one logical LED. Must be controlled as SK6812 type, color order: BRG, swap W and G (this option is available since WLED 0.14.0-b1)

But the lights just flicker like crazy. Switching WLED settings definitely does something, but not the intended effect.

Using the domestic automations controller. On the latest WLED firmware. LEDs are powered directly by a 24V 10A PSU. Originally I thought my data cable was too long but it still has all the issues plugged directly into the controller.

Has anybody got these strips working? Is the WLED wiki wrong?

  • v1605@lemmy.worldEnglish
    4·
    7 months ago

    Flickering like this usually occurs when the controller and lights are not using the same ground.

    • brownmustardminion@lemmy.mlOPEnglish
      3·
      6 months ago

      Bingo! Feeling a bit stupid for missing that but thankfully that was the issue and now everything is working perfectly. Thank you.