#nobridge
They say nothing about their distro having no upstream. If they make a distro based of Debian/Arch/Fedora I don’t see that as dismissing their efforts anymore than Nobara/SteamOS/Ubuntu/Mint does.
I rather they enforce their requirements on their own spin then try to force existing distros to implement said reqs. They should obviously donate to the foss community when using the technology the community maintain though!
EU is behind the restrictions for vaping liquids, not Sweden. :)
https://health.ec.europa.eu/tobacco/product-regulation/electronic-cigarettes_en
Yeah, they had started limiting what you could buy in Sweden as well. My last time mixing I bought a silly amount of 18mg/ml 10ml strong menthol bottles and large 70/30 PG/VG bottles and ended up with my own 3mg/ml mixture that still tasted menthol, although not as overwhelmingly so.
I think part of it is something else - ease of use and ease of access.
The “world that makes sense” product exists already:
https://www.elementvape.com/box-mod-kits
While I was vaping I mixed my own liquids though, as the cost savings was immense and I could easily lower the nicotine mg/ml on my own until I quit it altogether.
Yeah, if there’s a full system failure without any backups and no option to get the system operational again then I would land in clone the drives before trying to restore data from them.
If the leaks are correct we’re talking about 120W TDP and higher power and thermal efficiency than the 7000 series of X3D CPUs.
L2 8MB, L3 96MB(32MB + 64MB) for a total of 104MB according to Toms Hardware
https://www.tomshardware.com/pc-components/cpus/extensive-amd-ryzen-7-9800x3d-specs-leak-details-unlocked-120w-cpu-with-5-2-ghz-boost-clock
My water is stored in a dark and cool food cellar that stays at 12-15°C (Below 60°F) all year round and in sanitized food-safe water containers. So far the water has had neither colouration, smell or taste after a year of storage.
The next bit is a citation from “Livsmedelsverket”, which is responsible for food safety in Sweden, and has been through a rough Google Translate because it’s too long for me to care to manually translate it. A link to the Swedish PM is found at the bottom.
TL;DR: In a biologically stable system (low carbon content in the water and limited possibility of utilization carbon from the material, there is really no upper limit to how long the water can last stored from a microbiological point of view. This according to microbiologists and risk assessors at the Swedish “Enheten för biologiska faror” (Unit for biological hazards).
Preface
This PM constitutes a scientific basis for microbiological risks during the growth of bacteria in water stored in a can for a long time.
The material has been produced to order by The unit for sustainable food consumption and will be the basis for advice on how how long a consumer can store water.
Responsible for the report’s content is Jakob Ottoson, microbiologist and risk assessor at the Unit for biological hazards.
The report has been fact-checked by Roland Lindqvist, senior microbiologist and risk assessor at the Unit for Biological Hazards.
The Swedish Food Agency
[…]
Risk characterization
Questions and answers
The US Centers for Disease Control (CDC) has a website on behavior and storage of drinking water in cans Creating and Storing an Emergency Water Supply
| water, Sanitation, & Hygiene-related Emergencies & and Outbreaks | Healthy Water | CDC. Make Water Safe During an Emergency (Print-only) (cdc.gov)
Among other things, it is stated that the water is replaced every six months and that the cans are sanitized with chlorine.
a. Evaluate whether the information on the CDC website is useful for Swedish conditions.
Answer: The short answer is yes, the information can be used under Swedish conditions.
However there is theoretically no upper limit to how long the water can be stored.
For example, specified a shelf life of 2 years in tetrapack and 12 months in bag in box on the water that was taken revealed in a pilot study (Livsmedelsverket 2024b).
The specified chlorine concentration for sanitization is large and not really necessary (see further below).
Of the potential pathogens frequently detected in drinking water systems (see Hazard Identification), including bottled water,
M. avium and A. hydrophila have the potential to infect humans via the gastrointestinal system.
However, there is no epidemiological connection that this has happened and the likelihood of illness following consumption of stored water is assessed as very low and limited to an immunocompromised population.
However, smell and taste can be affected by any microbiological growth.
In a biologically stable system (low carbon content in the water and limited possibility of utilization carbon from the material, there is really no upper limit to how long the water can last stored from a microbiological point of view.
[…]
What is the best way to clean the cans?
Answer: The best way is to rinse out of the can.
Any remaining stains that may be made up of biofilm is wiped or washed away in a way that prevents as much as possible that the material is scratched because this gives bacteria in the water a larger surface to attach to and new carbon sources may leak from the material.
If necessary, cleaning agents, e.g. hand washing detergent, used, but then it needs to be rinsed off thoroughly.
If necessary, the can can be disinfected with chlorine.
However, the latter is not necessary as there are no obvious ones microbiological hazards in the water if it is initially of drinking water quality that was filled into a pure dunk (see answer to question 1).
A certain excess of free chlorine can, however, extend the time to the build-up of new biofilm (Huang et al. 2020) but can also lead to unpleasant odors and taste of the water and the formation of harmful by-products such as trihalomethanes (Food Administration 2024a).
In case of recurring problems with visible growth, smell or taste within six months, however, sanitizing with chlorine, or buying a new storage container, can be one alternative.
A spice measure (one ml) of chlorine (12% chlorine by weight) in three liters of water gives a total content chlorine corresponding to 50 ppm.
The vessel should be rinsed out after the treatment (in about 30 minutes) and air dry before refilling with new water.
Citation from
Livsmedelsverket. Ottoson, J. 2024. PM 2024: Vatten på dunk - Riskvärdering. Livsmedelsverkets PM.
Uppsala.
PM 2024
ISSN 1104-7089
https://www.livsmedelsverket.se/globalassets/publikationsdatabas/pm/2024/pm-2024-vatten-pa-dunk-riskvardering.pdf
I try to always keep 30L to 50L of water safely stored in the food cellar.
If you store it properly it can stay safe and drinkable for years, I replace it about once a year though.
As someone who mixed his own vape fluids and slowly lowered the nicotine to ~1.8mg/ml and then went cold turkey first on nicotine and then also on vaping. The craving for a cigarette full of tar is still there once in a while when drinking or when completely stressed out.
Most of the time it’s my brain wanting “5 minutes of fresh air” while working on a problem or thinking back about a good time such as a beer, a smoke and good company during a backyard bbq. I can do those things without the nicotine, and I do.
It’s rare now though, especially compared to how it was when I was still vaping nicotine.
Here’s another one putting the blame on them not investing in OpenAI:
https://www.reuters.com/technology/artificial-intelligence/how-chip-giant-intel-spurned-openai-fell-behind-times-2024-08-07/
At the same time Intel is definitely entering the race, and more competition is always nice:
Microsoft CEO Satya Nadella also appeared at the Intel event, where he announced that his company will use Intel’s relaunched foundry to make future chips.
In 2022, the US government passed the CHIPS Act promising $52 billion to reinvigorate domestic chipmaking and secure silicon supply lines.
According to a Bloomberg report, Intel is in line to receive $10 billion of that money.
Or this piece about creating an open-source software competitor for Nvidia, among other things:
Also importantly, Intel is spearheading a consortium of heavy hitters that are developing open-source software which can interface with all AI chips.
Such software would eliminate Nvidia’s (NASDAQ:NVDA) biggest competitive advantage: its software, which enables its chips to be easily managed simultaneously.
Intel’s consortium also includes Arm (NASDAQ:ARM), Alphabet (NASDAQ:GOOG, GOOGL), and Broadcom (NASDAQ:AVGO).
It expects to unveil a finished product by the end of this year.
Corporate / Enterprise AI solution with quite a customer/partner list:
[…]customers and partners, including Bharti Airtel, Bosch, CtrlS, IBM, IFF, Landing AI, Ola, NAVER, NielsenIQ, Roboflow and Seekr.
They’re starting to release tools to use Intel ARC for AI tasks, such as AI Playground and IPEX LLM:
https://game.intel.com/us/stories/introducing-ai-playground/
https://www.intel.com/content/www/us/en/products/docs/discrete-gpus/arc/software/ai-playground.html
https://game.intel.com/us/stories/wield-the-power-of-llms-on-intel-arc-gpus/
https://github.com/intel-analytics/ipex-llm
Personally I wouldn’t count Intel out of the game just yet, gonna be interesting to see what happens during 2025-2026.
So it’s a lightweight laptop but lacks the battery time to work on the go. (6 hours)
I imagine the youtube link is about the following:
Discord is firing back against MapleStory devs over copyright infringement and users are caught in the crossfire.
In some cases they look for generic virtual hw devices, in other cases things like available cpu flags or BIOS version.
There are ways to hide it though:
https://github.com/zhaodice/qemu-anti-detection
https://forum.proxmox.com/threads/how-do-i-hide-the-fact-to-windows-that-it-runs-in-a-vm.115627/
After browsing through Subscribed/New I usually check out All/Top 12 hours and All/Active. If I still feel the need to doomscroll I might venture into All/New. My Subscribed list isn’t moving very fast…
It’s even easier to simply visit the community, if you aren’t subscribed you get a big nice block button in the sidebar.
No idea to be honest, been a long time since I ran Windows at home.
Can always use the Windows 10 LTSC 2021 iso to create the Windows To Go. https://www.microsoft.com/en-us/evalcenter/download-windows-10-enterprise
Getting a proper license is gonna be impossible as a private consumer though, or well you can probably find someone selling the product keys online for cheap but that isn’t a real sales channel and it could suddenly become deactivated by Microsoft. I can find sites illegally selling them for as low as $14 when doing a quick search.
The real way to get the license is to sign up for their Volume Licensing Program.
Windows Enterprise LTSC is available in the per-user and per-device model, depending on the Volume Licensing program through which it’s acquired.
https://learn.microsoft.com/en-us/windows/whats-new/windows-licensing#windows-desktop-offerings-available-through-commercial-licensing
https://learn.microsoft.com/en-us/licensing/vlsc-faqs-home-page
I’d look at wireguard / tailscale / headscale and hide your services behind a vpn