neidu3@sh.itjust.works to 3DPrinting@lemmy.worldEnglish · 1 month ago🤔 It's fiiiiine...dreifir.comexternal-linkmessage-square3fedilinkarrow-up125arrow-down10
arrow-up125arrow-down1external-link🤔 It's fiiiiine...dreifir.comneidu3@sh.itjust.works to 3DPrinting@lemmy.worldEnglish · 1 month agomessage-square3fedilink
minus-squareanguo@piefed.calinkfedilinkEnglisharrow-up4·1 month agoAre those scratches on the bed? My skin is crawling.
minus-squareneidu3@sh.itjust.worksOPlinkfedilinkEnglisharrow-up6·edit-21 month agoSome PETG residue after scraping off a notoriously resistant brim a while back. It doesn’t affect the print, but it’s fugly enough that I rarely use that side of the sheet. Note that the lighting causes it to look worse than it actually is.
Are those scratches on the bed? My skin is crawling.
Some PETG residue after scraping off a notoriously resistant brim a while back. It doesn’t affect the print, but it’s fugly enough that I rarely use that side of the sheet. Note that the lighting causes it to look worse than it actually is.