Heeeeeyyyyyy. I have a k1c with cfs, is there open source support? I’m dumb, I like the printer, and the cfs is alright. Not thrilled about the opaque software and definitely not thrilled with ‘cloud intrgration’
I have a Prusa XL, and the reason is, Prusa is (still) mostly open-source. And quite frankly it’s the only reason why I stick with Prusa, because technically they’re behind the curve.
Same. Still like their support and community too. It’s not so far behind that I feel like it’s a compromise to the point where I can get it to do everything I want it to do. I’m paying for my open source preference and the support / community instead of the most modern fancy features. I want both, but I’d still choose the former especially when the latter seems to involve more and more privacy infringement.
I’m paying for my open source preference and the support / community instead of the most modern fancy features. I want both, but I’d still choose the former
I try to apply the same logic whenever I can too.
For instance, my laptop is a MNT Reform: it’s a very good laptop, but it’s literally 6 times the price of a comparatively-specced laptop from a big-box store.
And my cellphone is a Fairphone 5 running Ubuntu Touch. I chose the Fairphone for the repairability and increased openness, but it’s also 2 to 3 times the price of a more common brand cellphone with similar performances. And Ubuntu Touch itself comes with its own set of restrictions, but that’s the price of trying to be as free from the Android ecosystem as possible.
So yeah, you can do open, but the choice is very limited and you pay a lot for the privilege.
I chose the Fairphone for the repairability and increased openness, but it’s also 2 to 3 times the price of a more common brand cellphone
Only outside of Europe or their free-trade partners, in Europe I can get a Gen 5 for 400€ and Gen 6 for about 550€. It’s extremely annoying for most countries, but regarding the US it’s 100% their regime’s fault for not having any comparable company (they get immediately smushed by Google, Apple & Co by any means necessary) or at least low / no tariffs with the EU zone (Trump literally killed a done deal in this regard one week before ratification with his threats of invading Greenland).
For instance, my laptop is a MNT Reform: it’s a very good laptop, but it’s literally 6 times the price of a comparatively-specced laptop from a big-box store.
Now that’s really special. :D There are a lot of “normal” (x86) devices on the market that are way more affordable as well. For a while Slimbook offered a modern native Linux laptop for <500€, and there are also companies like System76 (US), NovaCustom (NL) or Star Labs (UK) with laptops running on open firmware that come with less restrictions and powerful hardware.
For people who aren’t (yet) poor it’s mostly a problem of discoverability and lack of knowledge not to go with the more sane products. We get bombarded with ads promising the best experience on the usual platforms (that are as manipulative as possible). BambuLab also plays this game perfectly, their influencer marketing paired with VC-funded undercutting prices are top notch in getting people locked into their garbage.
I don’t get why they insist on sticking to their own somewhat inferior software platform when a good, 100% open source, and better performing alternative exists with klipper.
Helper script (2nd link) is easier to use. simple AF (first link) is fully open source, but requires you to use another bed leveling probe - no open source „driver” for prtouch- the built in one (which is slow and not terribly accurate anyway).
Creality Helper Script is a must have. My K1C has run it through the very first second.
Getting as much open source (for a reasonable budget) and control on my marines is the main decision factor for my purchases.
Heeeeeyyyyyy. I have a k1c with cfs, is there open source support? I’m dumb, I like the printer, and the cfs is alright. Not thrilled about the opaque software and definitely not thrilled with ‘cloud intrgration’
I have a Prusa XL, and the reason is, Prusa is (still) mostly open-source. And quite frankly it’s the only reason why I stick with Prusa, because technically they’re behind the curve.
Same. Still like their support and community too. It’s not so far behind that I feel like it’s a compromise to the point where I can get it to do everything I want it to do. I’m paying for my open source preference and the support / community instead of the most modern fancy features. I want both, but I’d still choose the former especially when the latter seems to involve more and more privacy infringement.
I try to apply the same logic whenever I can too.
For instance, my laptop is a MNT Reform: it’s a very good laptop, but it’s literally 6 times the price of a comparatively-specced laptop from a big-box store.
And my cellphone is a Fairphone 5 running Ubuntu Touch. I chose the Fairphone for the repairability and increased openness, but it’s also 2 to 3 times the price of a more common brand cellphone with similar performances. And Ubuntu Touch itself comes with its own set of restrictions, but that’s the price of trying to be as free from the Android ecosystem as possible.
So yeah, you can do open, but the choice is very limited and you pay a lot for the privilege.
Only outside of Europe or their free-trade partners, in Europe I can get a Gen 5 for 400€ and Gen 6 for about 550€. It’s extremely annoying for most countries, but regarding the US it’s 100% their regime’s fault for not having any comparable company (they get immediately smushed by Google, Apple & Co by any means necessary) or at least low / no tariffs with the EU zone (Trump literally killed a done deal in this regard one week before ratification with his threats of invading Greenland).
Now that’s really special. :D There are a lot of “normal” (x86) devices on the market that are way more affordable as well. For a while Slimbook offered a modern native Linux laptop for <500€, and there are also companies like System76 (US), NovaCustom (NL) or Star Labs (UK) with laptops running on open firmware that come with less restrictions and powerful hardware.
For people who aren’t (yet) poor it’s mostly a problem of discoverability and lack of knowledge not to go with the more sane products. We get bombarded with ads promising the best experience on the usual platforms (that are as manipulative as possible). BambuLab also plays this game perfectly, their influencer marketing paired with VC-funded undercutting prices are top notch in getting people locked into their garbage.
I don’t get why they insist on sticking to their own somewhat inferior software platform when a good, 100% open source, and better performing alternative exists with klipper.
https://pellcorp.github.io/creality-wiki/
https://guilouz.github.io/Creality-Helper-Script-Wiki/
🩷🩷🩷I’ll check it out! Thanks so much!
Helper script (2nd link) is easier to use. simple AF (first link) is fully open source, but requires you to use another bed leveling probe - no open source „driver” for prtouch- the built in one (which is slow and not terribly accurate anyway).
Creality Helper Script is a must have. My K1C has run it through the very first second. Getting as much open source (for a reasonable budget) and control on my marines is the main decision factor for my purchases.