ProdigalFrog@slrpnk.net to 3DPrinting@lemmy.worldEnglish · 9 days agoMaking a 3d-printed Underwater Dive Helmet With A Floating Air Supplywww.youtube.comexternal-linkmessage-square34fedilinkarrow-up155arrow-down13
arrow-up152arrow-down1external-linkMaking a 3d-printed Underwater Dive Helmet With A Floating Air Supplywww.youtube.comProdigalFrog@slrpnk.net to 3DPrinting@lemmy.worldEnglish · 9 days agomessage-square34fedilink
minus-squareKorhaka@sopuli.xyzlinkfedilinkEnglisharrow-up1·7 days agoOverpressure, 10m deep is roughly double the pressure at sea level.
minus-squareProdigalFrog@slrpnk.netOPlinkfedilinkEnglisharrow-up1·edit-26 days agoI’m not super well versed with diving, but wouldn’t the excess pressure and air just go out the bottom of the helmet? it’s open to the water below, similar to shallow-water helmets, which are used by untrained tourists.
Overpressure, 10m deep is roughly double the pressure at sea level.
I’m not super well versed with diving, but wouldn’t the excess pressure and air just go out the bottom of the helmet? it’s open to the water below, similar to shallow-water helmets, which are used by untrained tourists.