ProdigalFrog@slrpnk.net to 3DPrinting@lemmy.worldEnglish · 9 days agoMaking a 3d-printed Underwater Dive Helmet With A Floating Air Supplywww.youtube.comexternal-linkmessage-square34fedilinkarrow-up155arrow-down13
arrow-up152arrow-down1external-linkMaking a 3d-printed Underwater Dive Helmet With A Floating Air Supplywww.youtube.comProdigalFrog@slrpnk.net to 3DPrinting@lemmy.worldEnglish · 9 days agomessage-square34fedilink
minus-squarePhoenixz@lemmy.calinkfedilinkEnglisharrow-up1·7 days agoThis too Way too many ways for this to go wrong in the hands of dumb people
minus-squareKorhaka@sopuli.xyzlinkfedilinkEnglisharrow-up1·7 days agoIron lung diving snorkel setup. Allows you to overcome the pressure and use a 15m long snorkel! And you accidentally set it to the wrong depth and blow up your lungs.
minus-squareProdigalFrog@slrpnk.netOPlinkfedilinkEnglisharrow-up1·7 days agoHow would it blow up your lungs?
minus-squareKorhaka@sopuli.xyzlinkfedilinkEnglisharrow-up1·7 days agoOverpressure, 10m deep is roughly double the pressure at sea level.
minus-squareProdigalFrog@slrpnk.netOPlinkfedilinkEnglisharrow-up1·edit-26 days agoI’m not super well versed with diving, but wouldn’t the excess pressure and air just go out the bottom of the helmet? it’s open to the water below, similar to shallow-water helmets, which are used by untrained tourists.
This too
Way too many ways for this to go wrong in the hands of dumb people
Iron lung diving snorkel setup. Allows you to overcome the pressure and use a 15m long snorkel!
And you accidentally set it to the wrong depth and blow up your lungs.
How would it blow up your lungs?
Overpressure, 10m deep is roughly double the pressure at sea level.
I’m not super well versed with diving, but wouldn’t the excess pressure and air just go out the bottom of the helmet? it’s open to the water below, similar to shallow-water helmets, which are used by untrained tourists.