A few real life examples, all of which I’m in the middle of:

  • Fixing this closing mechanism for this box in the kitchen. A bit of trial and error to 3d print a replacement for this part that broke off.
  • Learning Rust. I got fluent in Perl in the previous century, and never quite got to that level with anything else. I figured it’s time to pick up something more modern.
  • Sorting out my homelab/selfhost setup. The hardware is in place, but the software side isn’t quite there yet.
  • The greywater vent goes up to the attic. I have started planning adding a vent and some more piping to place the endpoint outside, but it’s probably not gonna be done until spring as it’s cold as fuck these days.
  • Autopilot module for an RC aircraft, complete with altitude and attitude adjustments. Next up on the too list is navigating through waypoints. If budget allows I will build a plane around it next year.
  • Homebrewing a weather station door bell camera combination. Early planning stage.
  • DonkeyStar@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    29 minutes ago

    I’ve been working on fixing sagging floor joists, but it’ll be out of my hands soon. Found some broken ones that fungus had gotten to, but I’m thankfully covered by insurance for that.

    I need to build a small staircase, sand and paint a deck, and take advantage of the cold to remove vines and brush I let take over during summer.

    Inside, I’ve got a tv with a fault somewhere between the backlight and the power board, but neither part is available to buy from my favored shops, so I’m going to try replacing board bits. Related to the joists, I bought an RC car with a camera to run in the crawlspace to do an inspection. It said it had lights. It does, but they’re decorative. So I’m going to rewire it and attach white LEDs to the camera so that I can see in the dark like I originally intended. Not that I need the car anymore, but why not?

  • josephc@lemmy.ml
    link
    fedilink
    arrow-up
    1
    ·
    2 hours ago

    Need to fix the vent fan in my bathroom. I’ve got a game I’m putting together that I’d like to make some progress on. I just had a friend visit and spent a solid week cleaning and rearranging and organizing my apartment.

    Been writing a campaign, too, which has been fun. I’m farther along in it than I am in my actual short story.

  • HubertManne@piefed.social
    link
    fedilink
    English
    arrow-up
    3
    ·
    6 hours ago

    Nothing in a long time. Used to make my own rigs back in the day and owned (well the bank really owned it) a two flat fixer upper for a bit and was doing a lot of projects on that. I really don’t have it in me anymore though. If I get a job I keep on wondering if I will be able to handle it.

  • JakoJakoJako13@piefed.social
    link
    fedilink
    English
    arrow-up
    5
    ·
    7 hours ago

    I have a card game I’ve been working on that I’m not sure how I want to release it as. A pc game is a dream of mine but a physical tcg is kinda where my heart wants it to go.

    I got the first pass of the rules done. I got about 400 cards on first and second pass. I got the card frames worked out though they could all do with some refining. I have some card art done in my chicken scratch pixel art style. I really want to play test it.

    The gist of it is hero mtg but you’re a hacker and you have to build programs to destroy the enemy. I got some neat rules fucking with mana in a way that looks like the Digimon TCG from afar but is way more expressive imo.

    Besides from that I’m on what feels like year 5000 of learning how to code. I’m slowly taking apart bits and pieces of cmus and nnn to make a new tui music player. This will be the second time I wrote cmus from scratch to try and figure out the functions and how it was out together. It makes a ton more sense this time around. I’ve started doing the same thing with nnn because… Idk what I’m doing lol… I need to look at files, why not look at a file manager? So yeah that’s a fun little nightmare.

  • ConfidentiallyIncorrect@lemmy.ca
    link
    fedilink
    arrow-up
    3
    ·
    edit-2
    6 hours ago

    I tell myself that all of my hobbies are worthwhile because im using it as learning to progress to the next step. Sometimes it works sometimes it gets abandoned. Overall im having fun with it.

    Homemade Yogurt

    -Its actually kefir and im on my second attempt, doing it the poormans way of using storebought as an inoculant and leaving a 4 litre jug of milk on the counter for a week, eventually Ill get the grains and do it proper

    -This is my step one of making cheese, just dipping my toes in it now. Next up is a ricotta then mozzerella. If im still interested after that ill try a cheddar

    Homemade Cider

    -Its surprisingly easy to make booze, step two is to do a Kombucha, Water Kefir and Kvass and learn what the differences are

    -I bought a kegerator with the intent of cutting back on my soda water addiction cost, I have to finish setting it up

    Homelab 101

    -Installed Linux on my desktop

    -Installed Jellyfin for movies (but actually for music), trying to determine the best way for me to use it off of my home network

    -Transfer Spotify playlists, download music, delete spotify. I was spending $25 a month, that will be redirected to Bandcamp

    -The far reach is to install an antenna and get my local radio independent stations streamed to my phone

    -Maybe install OpenWRT on my router

    -Set up Plasma Bigscreen on my TV to limit it tracking me

    Dumb Home Automation

    -Learn and implement how to link several switches together with a dimmer without an app or wifi

    -My friend told me about automatic blinds that just clip on to your existing chain and run on batteries, If it was just a dumb timer one I’d be into setting that up

    New Bicycle

    -I am stuck in a loop of what to get, I do mostly city riding with a little bit of camping

    -I really want to build an Ebike but it would have to be “A good one” aka $$$, but then none of my friends ride ebikes so that might not mesh

    -Then I want an aliexpress carbon fibre bike, $ , but I already have a bike so do I really need to buy a new one thats almost the same?

    I think I need to start getting other people involved in certain projects, I spend a bunch of time thinking about the best path forward but get stuck easily. My friends are nerds too, but only in specific areas. I need more nerds.

  • Console_Modder@sh.itjust.works
    link
    fedilink
    arrow-up
    6
    ·
    9 hours ago

    Next year when I have some vacation time, I am going to burn a week to install Linux on my desktop. I installed Garuda on a laptop to try out, but I’ve been pretty busy lately. Tried to tinker with it for the first time in like 2 months, but I forgot the password. Guess I gotta reinstall now

    Years ago I would make mods for Left4Dead2, and I kinda want to get back into doing that. I’ve been fascinated with the Archipelago randomizers for the past 2 or 3 years, so I have been thinking of making one of those for a game. 3 problems with that though. I’d have to scour my library for a game that doesn’t already have a randomizer made/in-progress, it would have to work well with the format, and I want a game that is interesting enough that I am not going to want to commit toaster-bath since I will need to spend a lot of time with it

  • ThisUsernameKillsFascists@piefed.social
    link
    fedilink
    English
    arrow-up
    7
    ·
    9 hours ago

    I’ve been working on my own album for about 6 years now, and I’m finally at the mastering stage. I’m a music professional by trade - these days mostly mastering, but I’ve been recording, mixing, mastering, and occasionally producing other people’s music for a quarter century. This will be my first proper artist release, and it is 100% me, start to finish. Maybe once I’ve finished mastering I can start on the important stuff, like figuring out my artist name, cover art, etc….

    • Aralakh@lemmy.ca
      link
      fedilink
      arrow-up
      2
      ·
      8 hours ago

      Congratulations, that’s awesome perseverance! Will you be releasing it on bandcamp or something similar? Also, your username is a pretty awesome artist name already :p

      • ThisUsernameKillsFascists@piefed.social
        link
        fedilink
        English
        arrow-up
        3
        ·
        6 hours ago

        Yeah, definitely releasing on Bandcamp and likely all the streamers as well (still debating whether to include Spotify or not). Idk about artist name, but maybe This DAW Kills Fascists would be a good name for a future album if I ever complete another one - I already have a title in mind for this album

        • Aralakh@lemmy.ca
          link
          fedilink
          arrow-up
          1
          ·
          3 hours ago

          Ohh yeah that’d be a dope name for album, I’d check it out/support for the name alone haha. That’s sweet, when you release it, share the link here (if you’re comfortable)!

  • Tywèle@piefed.social
    link
    fedilink
    English
    arrow-up
    5
    ·
    9 hours ago
    • Cleaning my home bit by bit (my kitchen especially)
    • Creating my own witchcraft tradition to get more in touch with my spirituality
    • Completing my Nissa collection for Magic: The Gathering
  • anakin78z@lemmy.world
    link
    fedilink
    arrow-up
    5
    ·
    10 hours ago

    I just updated a script on my Steam Deck that automatically sends screenshots to my cloud storage. I don’t know why, but it makes me happy to have my screenshots available anywhere I am.

  • melsaskca@lemmy.ca
    link
    fedilink
    arrow-up
    5
    ·
    10 hours ago

    I’ve decided to try and map similar tales and stories from the past and compare the similarities to stories/tales from the bible. The flood myth feels like a good place to start.

  • da_cow (she/her)@feddit.org
    link
    fedilink
    arrow-up
    7
    ·
    11 hours ago

    Currently its mainly adjusting my working environment by learning even more Emacs features and also writing some additional scripts in order to make system administration easier.

    Learning Emacs

    Currently I’m starting to get used to dired, so that I can move and sort my files even more effectively. I also started using tags and Properties in my documents and experimenting with their usage. I’m also trying out org-todo, but so far I have not been able to get used to using it consistently and Theres still quite a lot of stuff I don’t know about its usage

    System administration

    I am currently writing my own script that allows me to mass install packages, by specifying them in a config file. The advantage of this script is, that it can be used as a general purpose interface for package managers and also as a script launcher, to install/manage software through user scripts. The reason I am writing this is because I am quite lazy and don’t want to remember what software I need (and from where I have to install them) to get a new installation up and running, as I want. This script allows me to specify lots of software packages in a config file, group them together and then install them all at once.

    If this project is finished I will probably start working on another project to manage my config files for my system. The end goal is, that I can create themes for my system and then cycle through them without swapping out the config files by hand.

  • Synapse@lemmy.world
    link
    fedilink
    arrow-up
    8
    ·
    14 hours ago
    • Building furniture in my apartment (from scratch)
    • setting up a live-stream for the new year fireworks
    • maintaining a Meshtastic node