• AltheaHunter@lemmy.blahaj.zone
    link
    fedilink
    English
    arrow-up
    11
    ·
    5 hours ago

    I once had the inner lid of a microcentrifuge (one of the plastic ones with a snap-like closure) pop off mid-spin. It shot upward with enough force that it knocked the fully latched upper lid open and then shot across the room like a frisbee. Luckily it just hit some shelves and landed on the floor so nobody was hurt but it scared the shit out of me.

  • NobodyElse@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    46
    ·
    13 hours ago

    I was on the room next to an ultracentrifuge when it went off balance (one of the tubes in it cracked). The outer containment (barely) held, but that’s one of the loudest things I’ve ever heard.

    • clif@lemmy.world
      link
      fedilink
      English
      arrow-up
      69
      ·
      edit-2
      14 hours ago

      First frame is a centrifuge that spins samples at high speed to separate the components in them (I think that’s the purpose, not a scientist). But, the samples are on one side making it unbalanced.

      Second frame is turning the centrifuge on.

      Third frame is a funeral.

      I hear that if it’s unbalanced, bad things happen, because you’re spinning an unbalanced rotor at high speeds.

      I honestly was coming to check the comments to see if anyone had experience with it so I could ask how bad it is.

      The comic is insinuating that if you do this, you die.

      EDIT: an unbalanced weight on a motor is how the vibration function in your phone works… Along with other things that need to vibrate (yes, those things). At least, that’s how they used to work.

      • usualsuspect191@lemmy.ca
        link
        fedilink
        English
        arrow-up
        13
        ·
        11 hours ago

        The funeral depicted is a viral video where the pallbearers are dancing/swaying so it’s like you’ll die and even your casket will be moving afterwards.

      • Eheran@lemmy.world
        link
        fedilink
        English
        arrow-up
        28
        ·
        14 hours ago

        The centrifuge would not run like that, it noticed the vibrations and turns off. They had that “feature” for decades now.

        • SolarMonkey@slrpnk.net
          link
          fedilink
          English
          arrow-up
          1
          ·
          5 hours ago

          I got weird rotary phone, GameCube, then that funeral video. I sort of thought this was some millennial meme I’m too out of the loop to understand. Lemmy is full of those.

      • SoleInvictus@lemmy.blahaj.zone
        link
        fedilink
        English
        arrow-up
        1
        ·
        9 hours ago

        It depends on the speed and size of the centrifuge, the mass of the load, and the magnitude of the imbalance. Someone else mentioned an ultracentrifuge, typically a large, washing-machine-like device that can spin larger loads at high velocity. The amount of energy released if they become significantly unbalanced is pretty huge: they have a containment layer, but some could kill you if the load got through and hit you.

        On the flip side, I may have intentionally ran unbalanced microcentrifuges a few (many, it was many) times as a grad student because I was too tired and lazy to make a counterweight. I just held it down with fairly firm pressure and it was fine. That’s not very good for its bearings, though. Sorry lab manager!

  • LillyPip@lemmy.ca
    link
    fedilink
    English
    arrow-up
    8
    ·
    14 hours ago

    My thought at the first panel was ‘welp, time for the Motrin’. Then ‘ohhh’.