Don’t get into woodworking if you have a compulsion to achieve accurate, precise results because wood is fiddly as fuck.
OR
DO get into woodworking if you have a compulsion to achieve accurate, precise results because it will burn that shit right out of you If you don’t die from an aneurysm first. It’ll teach you to build all sorts of wiggle room into everything in life, not just furniture.
People will think what you made was amazing, that it took so much skill.
Nope.
Only you know how you put everything together loosely, then tightened screws incrementally while adjusting clamps and smacking it with a rubber mallet until it looked right. There are pilot holes they can’t see that don’t go anywhere. You definitely missed gluing something important. You might have weighted a piece with epoxy and cat litter because you forgot to buy weights, it was 3 am, and you were unintentionally high as balls on stain fumes, but you really wanted to finish in time to surprise your partner for their birthday.
They don’t know, they’ll never know, and they don’t need to know.
My foray into woodworking began and ended with figuring “sheesh, custom picture frames are so expensive, how hard could it be?!”…
By the end of that experience, nothing felt real anymore. Every foolishly pure mathematical concept, every platonic ideal - shameful indulgences of the young and weak. Our grand edifices of knowledge, little more than piles of tattered rags with which we clothe our nakedness, arrogant and hubristic in our vulgar conceits.
After having worked with wood and son of a cabinet maker, I crave the strength and certainly of steel. I got into welding in a big way.some aluminium, but mostly steel. It’s such a wonderful material. Cut it, weld it, grind it, bam, new and bigger steel. You can’t make a piece of wood bigger.
Don’t forget the thousands of dollars in tools you’ll be compelled to buy and never being able to throw out even the small piece of wood because “you might need it someday”.
Tell me about it, and there’s always something better than what you have. How to be smart about buying tools deserves its own entire comment chain.
I didn’t know about these until recently, but I now recommend folks check out local tool libraries to get started and see what they want or need for low to no cost.
We have a one car garage full of maintenance and fabrication tools I’ve acquired over my life. They’ve paid for themselves multiple times over in even just the last decade, but the cost and space requirements are prohibitive for a lot of folks. It’s one of those “having money saves money” situations, but tool libraries can help a lot.
My partner complimented my new shelf recently. Then she looked closer and realised it was a few boards stacked up on the cheapest engineering bricks I could find but rotated so the holes are not visible.
Only got a folding hand saw which I suspect isn’t the best for making straight cuts, I had considered cutting up a railway sleeper for blocks instead of the bricks. Bricks worked out cheaper. Wooden blocks could look nice though.
Just cut pieces of wood big enough to cover the front of the bricks, and glue them on. Wood on the front, and brick on the side, will look like a cool design choice.
Don’t get into woodworking if you have a compulsion to achieve accurate, precise results because wood is fiddly as fuck.
OR
DO get into woodworking if you have a compulsion to achieve accurate, precise results because it will burn that shit right out of you If you don’t die from an aneurysm first. It’ll teach you to build all sorts of wiggle room into everything in life, not just furniture.
People will think what you made was amazing, that it took so much skill.
Nope.
Only you know how you put everything together loosely, then tightened screws incrementally while adjusting clamps and smacking it with a rubber mallet until it looked right. There are pilot holes they can’t see that don’t go anywhere. You definitely missed gluing something important. You might have weighted a piece with epoxy and cat litter because you forgot to buy weights, it was 3 am, and you were unintentionally high as balls on stain fumes, but you really wanted to finish in time to surprise your partner for their birthday.
They don’t know, they’ll never know, and they don’t need to know.
LOL I learned so much from this, thank you.
And also: Fume and dust extraction is no joke!!
I just tell everyone where all the mistakes were.
My foray into woodworking began and ended with figuring “sheesh, custom picture frames are so expensive, how hard could it be?!”…
By the end of that experience, nothing felt real anymore. Every foolishly pure mathematical concept, every platonic ideal - shameful indulgences of the young and weak. Our grand edifices of knowledge, little more than piles of tattered rags with which we clothe our nakedness, arrogant and hubristic in our vulgar conceits.
Don’t do it y’all. That abyss gazes back.
You need to conjure the ancient dark magics of woodworkers long past.
Underappreciated comment of the thread.
After having worked with wood and son of a cabinet maker, I crave the strength and certainly of steel. I got into welding in a big way.some aluminium, but mostly steel. It’s such a wonderful material. Cut it, weld it, grind it, bam, new and bigger steel. You can’t make a piece of wood bigger.
… but you’ll know
Don’t forget the thousands of dollars in tools you’ll be compelled to buy and never being able to throw out even the small piece of wood because “you might need it someday”.
Tell me about it, and there’s always something better than what you have. How to be smart about buying tools deserves its own entire comment chain.
I didn’t know about these until recently, but I now recommend folks check out local tool libraries to get started and see what they want or need for low to no cost.
We have a one car garage full of maintenance and fabrication tools I’ve acquired over my life. They’ve paid for themselves multiple times over in even just the last decade, but the cost and space requirements are prohibitive for a lot of folks. It’s one of those “having money saves money” situations, but tool libraries can help a lot.
“It’s made outta offcuts.”
quietly pushes entire bespoke server rack under bed
That’s my dream, except I want to complicate it by building guitars. So it actually has to work, not just look like it might.
I can’t build a guitar. I can build a guitar-shaped object. But I cannot build a guitar.
My partner complimented my new shelf recently. Then she looked closer and realised it was a few boards stacked up on the cheapest engineering bricks I could find but rotated so the holes are not visible.
Only got a folding hand saw which I suspect isn’t the best for making straight cuts, I had considered cutting up a railway sleeper for blocks instead of the bricks. Bricks worked out cheaper. Wooden blocks could look nice though.
Just cut pieces of wood big enough to cover the front of the bricks, and glue them on. Wood on the front, and brick on the side, will look like a cool design choice.
shia_labeouf_slowclap.gif