Curious on the experiences of those recently migrating to Linux from Windows 10, Intel-based MacOS, etc. How is it being on Linux? Anything surprise or frustrate you?
Been using Linux Mint since the summer. I went to create a letter on my newer Acer laptop on Windows 11 because the HP Beats wouldn’t go to Windows 11. Office 365 paywalled me. So I looked up Open and LibreOffice (going to try OnlyOffice soon) and got them both, completed the letter.
Then I thought… Windows is getting so crappy with this insult plus AI & ads… I wonder what Linux looks like these days? I had used it in the early 2000s, mostly Mandrake and Suse, as I recall, on KDE.
I was lucky I happened upon Distrosea, so I played with some there. I almost installed ZorinOS, but decided that dual booting Mint on the Beats laptop was better, because the Software Center has ratings and reviews.
There were a few hiccups with the flash drive, Secure Boot and all that. Ended up having to format the iso in Rufus before putting it on the flash drive with Ventoy, but it worked.
Granted, I don’t use my personal laptops that often, the last thing I want to do after being on my work laptop (which is Windows 11, but my coworker runs CachyOS and brings up work stuff in ThinkCast) is get on another laptop, especially where I work evenings.
Since then, I’ve wanted to put it (or smaller distros) on other older machines in the house for fun, but several of them have some issues… old Dell Dimension 2200 psu capacitors popped, so that was a no go… and the Dell Vostro tower we have is beeping at me, gotta have someone look at that… might be graphics card or mobo needs reseat.
I set up a dual boot Win10/Linux system so I would have the option to use windows when I needed. I have not booted into windows for a while now. The only thing I was using it for was to play some older games I could not figure out how to get running in Wine. I may have to use it for tax software if I can’t find something that runs under Linux though.
I use Mint and so does my wife.
Two laptops that Win11 doesn’t want to support, but we need them both and we don’t have the budget to replace them. No problems on mine, but the wife’s HP has some issues with closing the lid and I haven’t found a good solution to that yet.
Sleep doesn’t work because on wakeup the wifi and bluetooth are both dead; bluetooth doesn’t matter but the wifi’s needed for the internet and the only way to get it back up is to reboot the machine because it insists there’s a hardware failure and refuses to accept that there isn’t. I’ve even tried modprobe-ing the network stack but it has to be a full system restart (warm restart, not power cycle).
Hibernate threatens something nasty, can’t remember what offhand but I’m not even considering it.
I don’t want a lid shut to mean shutdown because shutting the lid shouldn’t mean losing work. So I’m left with the only remaining option that shutting the lid does nothing, and the LT stays on, but then if she puts something on top of the LT as she’s prone to do, some stuff can end up in a weird state, like taskbar icons following the mouse around even though they haven’t been clicked on, and there’s no way to stop them doing that without rebooting. I’m not sure how that happens; my hypothesis is that the keyboard and/or trackpad get activated, but no amount of me pressing on the lid in various places reproduces the problem.
Other than that she’s had no problem adapting to Linux Mint. Everything’s where she expects it. I’ve had to do some command-line jiggerypokery for various bits and bobs but a bit of DDG-ing finds that easily enough.
i love it, things have been just working lately. it feels like every day something is gonna give but thats just windows trauma
Not needed windows once. Tho I do have to use it on the job
I’ve been dual booting Windows and Linux (Ubuntu) for a while, and sadly I’m back on Windows after a month and a half of exclusively using Linux. The reason? Ethernet. I need to assign a static IP to a dev board with Ethernet, and while it works fairly easily on Windows, it just doesn’t work on Linux, saying it’s unavailable in the nmcli output.
Of course, Windows is worse than before. It hasn’t fixed the bug where it never updates the system time, forcing me to manually press sync on every boot. And it hasn’t fixed the newer bug where my laptop display needs to go down to 768p to display 300Hz, making me to go down to 60Hz to use the full 1080p resolution. All the while Microsoft pushes things nobody wants.
I went to Fedora in March of 2025. I never looked back. Definitely some frustration with video drivers and hardware issues (bad Samsung monitor), but nothing I haven’t been able to work around.
Most importantly, my computer runs great, my games run great, I have more control than ever, and I will never go back to Microslop. Their pivot to “AI EVERYTHING!!!” has been abhorrent, and I refuse to cooperate.
It’s going great. A bit of a learning curve at the start, but nothing difficult. I had a few minor issues along the way, but it’s all worth it, because I no longer get bothered by all the annoyances of Windows. My device is now managed, updated, etc by me instead of big tech that doesn’t serve my interests, feels much better.
I have a dual boot PC with mint and the nvidia drivers crashed the GUI on boot. I haven’t resurrected mint yet.
My Surface Book 3 with kubuntu is great but I have to turn it off, sleep will burn up the battery.
You might check if “sleep” means standby, i.e. the RAM remains powered, or hibernation, the RAM is written to disc. Setting up the latter should stop battery draining.
Bought a new gaming PC with an AMD GPU and went straight for Bazzite almost a year ago. It was pretty damn painless and straightforward. Especially the only thing I use it for are singleplayer or indie multiplayer games. Almost everything worked out if the box.
A lot of sim racing stuff worked surprisingly well.
It was a pain to learn how to install Assetto Corsa with its mods, needs a specific version of proton with specific windows libraries installed, but once I figured that all out it runs great.
It was also a pain when I bought a Chinese handbrake for sim racing, but thanks to the Sim Racing On Linux discord, a member wrote a custom driver for it for me and another member that bought it. Unfortunately, I can’t exactly install custom kernel drivers on Bazzite, so I ended up switching to CachyOS and have been enjoying that so far. It was a bit of a pain to switch as it requires more tinkering, but I got to a place where it was running nicely fairly quickly.
Went with Linux Mint back in July, set up a dual boot in case I’d need Windows for anything. Figured something or other wouldn’t work through wine or some such. Never have booted back to Windows since.
I think the only issue I’ve had is that my 8BitDo controller won’t work via Bluetooth, but it works fine via USB. (Other Bluetooth devices have been fine, not that I have many.)
I posted this before, but it feels like going back to the best days of PC ownership. It’s fast, I’m in control, everything I want works and I honestly don’t think about my OS very much.
I chose bazzite since I love gaming, but of course it’s just a competent OS overall with which I also do my private office tasks.
Booting up my PC finally feels like a joy again.
Like most people I use Windows 11 at work and the contrast is enormous.
This is my experience to a T. Picked Bazzite for gaming. It just works. Anyone worried about not being able to do the things you think you need Windows for need not worry. You can do all of that and more.
Like most people I use Windows 11 at work and the contrast is enormous.
Same
Open file explorer. Start a search. Open new tab in file explorer. Notice the folder path didn’t change. Observe that you permanently glitched the file explorer path bar until you close file explorer.
I hate using this buggy OS.
Set up dual boot with Pop! OS to give it a try and overall my experience is pretty positive.
There are a few things that are bothering me. For example, any time the system wakes from sleep, Firefox can no longer load new pages. Anything that was open prior to sleep works until I attempt to open anything new in that tab, and any new tab just refuses to do anything at all
I also miss HDR when I’m gaming. I ran cyberpunk for about a week in Linux and was pleasantly surprised that it ran just fine. Then I had to hit into windows for something work related and launched the game there after I was done… HDR makes a huge impact with my monitor and I didn’t realize how much it did until it was gone.
I was never one for HDR so I never even paid attention when I bought my monitor, switched to Bazzite and was surprised KDE supports HDR.
Firefox is still an issue on Bazzite, but PopOS came with some really weird sleep issues where it would sometimes even require a good kernel kill. That may have been something with having installed for an Nvidia card and changing to AMD.
It isn’t super smooth to configure yet, but it should be possible to use HDR. Have you tried that?
KDE Plasma has HDR support. You can check if your monitor is supported by booting from a cutting edge KDE distro like Fedora KDE.
It’s great. My only issue is my computer had issues with sleep mode. So, I just disabled it.
On Linux I would need to disable online only accounts, copilot, one drive, recall, bing search, edge, edge again, privacy settings, edge yet again…
Linux is great. Honestly it came a long way over the years.
After bouncing around a few distros, fedora was the one to make sleep mode work on my laptop
Does not work for me :( honestly though, I never used sleep mode anyway. So it may have been patched. But if my computer isn’t being used, it’s off.
It’s going well. I started selfhosting most of my services on a debian machine. TV doesnt have internet anymore, it’s hooked to a fedora mini pc that i use to play media. I’ve installed Asahi fedora on my M1 Pro macbook and it’s flawless.
Dont miss anything. The only thing that pisses me off is when i work on a document on nextcloud (using onlyoffice) it doesnt look nice on MS office. So for work stuff i have to sometimes log into ms office account and use their cloud to work on a presentation or something.
I also kind of have to keep the OSX installation for some photography stuff although when i have the time ill look for linux alternatives. Mainly i need something to edit fujifilm raw photos with
I think gimp and Photopea might be worth looking into, though I don’t have experience with those myself.







