• socsa@piefed.social
    link
    fedilink
    English
    arrow-up
    11
    ·
    2 hours ago

    I do engineering so the holy Trinity e^jπ = 1 is very important to my religion. Please be more respectful.

  • addie@feddit.uk
    link
    fedilink
    arrow-up
    8
    ·
    3 hours ago

    Speaking as a chemical engineer that’s worked in the water industry for twenty years; ‘3’ is sufficiently accurate as a value of pi for most engineering purposes. If I’m estimating how long it will take me to pump the water out of a tank and need to do the pipe equations in my head, then what I really want to know is if it’ll take an hour or a day or a week. If I wanted a new pump to do that permanently, then I’d do the sum, add 10% to allow for degradation of the pump and pipework over the decades, pass that information to our purchasing team who will then strike a deal with the pump manufacturer, and who knows what I’ll actually end up with. There’s not really much need for a really accurate value of pi.

    In fact, ‘5’ is probably sufficiently accurate as a value of pi for engineering purposes, and makes the calculations easier.

    Being able to do really accurate calculations does have its place, but having a feel for the kinds of numbers that are sensible is much more important for most day-to-day activities.

    • zout@fedia.io
      link
      fedilink
      arrow-up
      1
      ·
      17 minutes ago

      I guess it depends on what field you’re in as an engineer. I’m also a chemical engineer, and chemical engineering is very much FAFO engineering imo. I’ve worked with construction engineers, and they tend to be very precise in their calculations. Before they add their huge safety margins I mean.

  • g0d0fm15ch13f@lemmy.world
    link
    fedilink
    English
    arrow-up
    69
    arrow-down
    5
    ·
    6 hours ago

    I hate when people use ‘times’ like that. You have never once needed to MULTIPLY anything by 3.141… And yes you probable have, you just don’t recognize it or write it down in numbers.

    • tburkhol@lemmy.world
      link
      fedilink
      arrow-up
      54
      ·
      6 hours ago

      Ima say that someone who uses “times” instead of “multiply” has, in fact, probably never had any use for 6 digits of Pi. Or probably even 2 digits.

    • 9point6@lemmy.world
      link
      fedilink
      arrow-up
      9
      ·
      5 hours ago

      FWIW the times thing might just be British versus American English thing

      That particular aspect reads perfectly fine in British English

      The point is still a bit dumb, but not for that reason

      • Nora (She/Her)@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        9
        arrow-down
        1
        ·
        5 hours ago

        adding on as an American here, ‘times’ is fine but contextually its a bit weird?

        i can say “ten times ten” but “I have never once had to times anything…” is a bit weird? idk if its like a word that needs the number?

        It triggers the same vibe in my head as someone who would put adjectives out of order, like “the big red car” vs “the red big car.” both are technically fine but for whatever reason the size should come before the color.

        • Onomatopoeia@lemmy.cafe
          link
          fedilink
          English
          arrow-up
          3
          arrow-down
          4
          ·
          5 hours ago

          I agree with everything but your adjective order - there’s nothing in English requiring that order, though I find “red bug car” odd, I don’t think it’s as incorrect as saying “having to times something”.

          Curious what a linguist has to say here.

          • Sludgeyy@lemmy.world
            link
            fedilink
            arrow-up
            6
            arrow-down
            2
            ·
            edit-2
            2 hours ago

            • Opinion (e.g., fun, lovely)

            • Size (e.g., big, little)

            • Age (e.g., new, old)

            • Shape (e.g., round, square)

            • Color (e.g., red, blue)

            • Origin (e.g., American, French)

            • Material (e.g., rubber, wood)

            • Purpose (e.g., playground, sleeping)

            “She kicked the lovely big old round red American rubber playground ball across the yard.”

            Adjective ordering is not required but moving them around can change meaning and sound absurd.

            Times = multiplied by

            3 × 6 = 17 18

            3 multiplied by 6 equals 17 18

            Saying

            3 multiply 6 equal 17 18

            Does not sound correct

            Multiply is a verb

            Times is a preposition, nown, or informal verb

            “I have 6 nickels worth .05 dollars, I need to (…) .05 by 6 to get the amount”

            Times there would be an informal verb and not “correct”

            TL;DR: Always use multiply as a verb. If you want to be formal use “multiplied by” instead of times.

              • Nora (She/Her)@lemmy.dbzer0.com
                link
                fedilink
                English
                arrow-up
                1
                ·
                3 hours ago

                well that’s because its 18 ;)

                I’m sticking with my original theory.

                if the number is next to the multiplication, then you use times.

                for example “three times six is eighteen”

                but if the numbers being multiplied aren’t right next to it, you should use multiplied/multiply/multiply with.

                for example “I have three apples from each apple tree, and I have 8 apple trees. If I multiply I have 24 apples.”

              • Sludgeyy@lemmy.world
                link
                fedilink
                arrow-up
                1
                ·
                3 hours ago

                Sounds perfectly fine to me

                I use “times” a lot

                But in like a scenario where I was trying to figure something out.

                “30 cents! Oh they must have had 6 nickels and multiplied by its value to get that.”

                I’d say that. Many would say “times” there. Maybe even “timesed by” which is kind of funny

    • thenextguy@lemmy.world
      link
      fedilink
      arrow-up
      7
      arrow-down
      1
      ·
      6 hours ago

      And ‘takeaway’ for subtract.

      We should bring it up at the next pedants anonymous meeting. :)

    • ptu@sopuli.xyz
      link
      fedilink
      arrow-up
      4
      ·
      6 hours ago

      I have a feeling that you might have had to multiply with pi using several digits

    • Sludgeyy@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      5 hours ago

      Three times ten is (thirty)

      Three times nine is (twenty-seven)

      Three times eight is (twenty-four)

      Three times seven is (twenty-one)

      Three times six is eighteen

      Three times five is fifteen

      Three times four is twelve

      And three times three is nine

      And three times two is six

      And three times one is three, of course

      (Now, dig the pattern once more)

  • Endmaker@ani.social
    link
    fedilink
    English
    arrow-up
    38
    ·
    edit-2
    6 hours ago

    As a cheapskate, I’ve used it to determine which pizza is of the highest value i.e. largest area-per-dollar

    Depending on the store, it’s not always the largest pizza.

    Edit: after thinking about it, pi is a constant, and radius is directly proportional to diameter, so squaring the diameter is enough to provide a ranking of the pizzas’ values 😅

    • kn0wmad1c@programming.dev
      link
      fedilink
      English
      arrow-up
      5
      ·
      4 hours ago

      Are we doing pizza math? Here’s my entry.

      Did you know that two 12 inch pizzas is less pizza than one 18 inch pizza?

      We can use pi to determine the area of a 12" pie:

      A = πr² = π * 36 = 113.1in²

      Multiply that by 2 because we want two of them, so that’s 226 square gooey, cheesey inches of delicious pizza.

      Now let’s look at one 18" pie:

      A = πr² = π * 81 = 254.47in²

      So if it’s cheaper to get one 18" pizza as opposed to two 12" pizzas, you should always get the 18".

    • lol_idk@piefed.social
      link
      fedilink
      English
      arrow-up
      9
      ·
      4 hours ago

      I did this math when I delivered pizza and realized the weight was more important.

      You have to factor in the crust thickness and if someone offers pan pizza or thick crust without an upcharge that’s cheaper.

      Fortunately, you’ll have to try all the pizza in town to make this determination.

    • schipelblorp@sh.itjust.works
      link
      fedilink
      arrow-up
      3
      ·
      5 hours ago

      I’d want grams/ dollar, but that information is obviously not available on the menu. Most places only have a single type of crust, though, so area is close enough to compare, but if they have different crusts, you might be missing the higher value pizzas.

    • db2@lemmy.world
      link
      fedilink
      arrow-up
      8
      ·
      5 hours ago

      Or electrical engineer.

      OP probably like “no dude, pie are circle” in the same voice as the manager on Jimmy Neutron arguing about sodium chloride.

  • schipelblorp@sh.itjust.works
    link
    fedilink
    arrow-up
    19
    ·
    7 hours ago

    You think geometry is a practical skill, but if you work with carpenters, they have all kinds of work arounds for anything they need to cut and measure.

    The only time I’ve seen a carpenter get nerdy was when one had to build a large, circular roof, but even that may have been the result of not knowing how to fake it because it was such a novel project.

  • Godort@lemmy.ca
    link
    fedilink
    arrow-up
    12
    ·
    6 hours ago

    Someone has never had to answer some really stupid questions like “How many calories does 1 square inch of pizza have? I need to determine if I can use them as croutons in a salad.”

    A 14 inch pizza is usually between 2 and 3 pounds. If we assume 2.64 the math is easier.

    1.2kg total and a serving of 400g works out to be around 900 calories per serving, or 2700 for the whole pie.

    The area of a circle is πr^2

    7^2=49

    49*π=153.94 square inches.

    2700/153.94 = 17.5 calories per square inch.

    If you compare this to regular croutons, they’re about 4 times the calories, But absolutely worth it.

  • hperrin@lemmy.ca
    link
    fedilink
    English
    arrow-up
    9
    arrow-down
    2
    ·
    6 hours ago

    I wonder what kind of life one must live to never have to use anything beyond the most basic arithmetic. It must be sad.

      • db2@lemmy.world
        link
        fedilink
        arrow-up
        4
        ·
        5 hours ago

        Liar.

        XL=2πfLX_L = 2\pi f L XC=12πfCX_C = \frac{1}{2\pi f C}

        X(f)=∫−∞∞x(t)e−j2πftdtX(f) = \int_{-\infty}^{\infty} x(t) e^{-j 2\pi f t} dt

        ℏ=h/2π\hbar = h / 2\pi

          • db2@lemmy.world
            link
            fedilink
            arrow-up
            4
            ·
            3 hours ago

            In the movie they wouldn’t be real or they would be but for something goofy and unrelated. But yeah it does.

            • schipelblorp@sh.itjust.works
              link
              fedilink
              arrow-up
              4
              ·
              3 hours ago

              Yes, I know you worked hard on it, but I think the formatting makes it hard to read, and I only got two semesters of physics and 3 of calculus, so even best case it would probably look like a movie blackboard to me even in LaTEX.

        • krashmo@lemmy.world
          link
          fedilink
          arrow-up
          1
          arrow-down
          2
          ·
          5 hours ago
          1. I don’t use those equations at all. I don’t even recognize them, though that’s probably at least partly due to the horrific formatting of them in your comment.

          2. Software is the primary method of performing calculations in engineering and has been for my entire professional career.

          • zout@fedia.io
            link
            fedilink
            arrow-up
            1
            ·
            12 minutes ago

            Even I recognize those equations, and I only studied electronics on the tradie level before dropping out.

          • db2@lemmy.world
            link
            fedilink
            arrow-up
            2
            ·
            3 hours ago

            So you’re not qualified in the least for the profession you claim. We’re back to the part where you’re a liar.

  • Tomtits@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    5
    ·
    6 hours ago

    I’ve used it to calculate the volume of beer lines to see how much beer is essentially wasted from keg to tap.

    πr2l innit.